CK7PLUS

32mm large diaphragm multi-pattern FET microphone
Cena
344,60 €
287,17 € bez DPH
Dostupnosť:
Na opýtanie
Značka:
Hmotnosť:
4 kg
Bežná cena:
344,60 €

 Avantone "Cabernet (C-series)" mics are  designed to offer true professional performance at an absolutely  unbeatable price. Featuring high grade Polystyrene and Metalized  Polypropylene capacitors in the audio path as well as our own  proprietary edge terminated dual backplate 34mm 6 micron capsule, the  CK7+ has the component set that is normally attributed to modded or hot  rodded microphones.         

Our new premium capsule with a transformer coupled circuit allows an  incredibly airy open top end with a solid and thick low end, making the  CK7+ the most versatile microphone at its price point.  Milled from a  single piece solid brass, the body of the CK7+ was designed to give the  microphone a solid feel and the included custom retro shock mount  prevents unwanted vibrations from traveling up into the microphone.

            

The design, character and performance can be compared directly to  fine studio-standard FET mics...but at a fraction of their cost! 

  

The CK7+ has separate -10 dB pad & 80 Hz LF roll off  switches....The -10dB attenuation switch can be engaged when miking very  high SPL sources to keep from overloading the electronics. The 80Hz  high-pass filter switch can be engaged to reduce rumble and to keep  unwanted low frequencies from "muddying up" the track.

The CK7+ also features 3 separate polar patterns, it’s versatility  allows it to be a fantastic tool for a variety of situations.  All of  these features come together to give you a fully professional microphone  and a completely unbeatable value. 

 

Specifications   

  • Type: True Condenser        
  • Polar Pattern(s): Cardioid , Omni , Figure 8     
  • Capsule: 34mm 6 micron capsule    
  • Frequency Response: 20-20,000 Hz +/- 3dB              
  • Sensitivity: -38 dB (0 dB=1V/Pa)       
  • S/N Ratio: 77dB re 1Pa               
  • Maximum SPL: 139dB (0.5% THD @1000Hz)     
  • Equivalent Noise Level: (A-Weighted per IEC 286-4) < 16 dB     
  • Output Connector: Male XLR 3-pin              
  • High-Pass Switch: 80 Hz 6dB/octave      
  • Attenuation Switch: -10 dB       
  • Power Requirement: Standard 48 Volt Phantom / 5mA  
  • Included Accessories:                   
    • Shockmount          
    • Wooden Box in Metal Carrying Case              
  • Dimensions: 187mm x 51mm / 7.5" x 2"      
  • Weight: .65 kgs / 1.4 lbs       
  • Finish: Polished Nickel trim / Metallic Cabernet Red Body                          

Informácie o ochrane osobných údajov.