SXP118B/W

MARTIN AUDIO SXP118B/W, 18"ACTIVE+DANTE SUB BASS LOUDSPEAKER, FLOWN
Číslo výrobku
3576
Čistá hmotnosť
25 kg
Dostupnosť
Skladom
Predajná cena s DPH:
Cena na vyžiadanie
Tento produkt je dostupný lne na objednávku. Cena je stanovená pri objednávke.

Chcem zistiť cenu pre tento produkt

18"Aktívny Subwoofer na kolieskach a s rúčkami s možnosťou vešania, Dante, VU-Net


TYPE  Compact, direct radiating powered subwoofer 
FREQUENCY
RESPONSE (3)
47Hz – 150Hz ±3dB, -10dB @ 41Hz
DRIVER  18” (460mm)/4” (100mm) voice coil, long excursion,
ferrite magnet, waterproof cone
INPUT SENSITIVITY  -20dBu for 100dB SPL (CDD12/15 pre-set)
 -13dBu for 100dB SPL (CDD8 pre-set)
MAXIMUM SPL (4)  132dB continuous / 135dB peak 
DISPERSION  Omnidirectional / or Cardioid (paired) 
CROSSOVER  Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired) 
Module
 Audio input
CONNECTORS  Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon 
ANALOGUE INPUT IMPEDANCE  20 kΩ balanced to ground 
MAXIMUM ANALOGUE INPUT LEVEL  24.6 Vpp (+21dBu), over voltage protected 
Internal Processing  Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 48dB/Oct LPF
Up to 200ms input delay
 Pre-set selection via rear panel switch
Network
CONNECTORS  2 x Neutrik® Ethercon 
PROTOCOL TCP/IP and UDP/IP
Amplifier Module
TYPE  2 channel switch-mode, class D,
 Bridged Tied
PEAK OUTPUT POWER  2000W total 
AVERAGE EFFICIENCY  89% 
COOLING  External fan 
MAXIMUM AMBIENT TEMPERATURE  40°C (104°F) for full output 
Power Supply
TYPE  Switch mode, fixed frequency with PFC 
AC INPUT OPERATING RANGE  85 – 265V ~ AC, 50 - 60Hz 
POWER FACTOR  > 0.98 
NOMINAL POWER CONSUMPTION  125W 
 MAINS CONNECTOR   Neutrik® Powercon True1 
Mechanical
ENCLOSURE  Extensively braced multi-laminate plywood. 
FINISH  Durable Polyurea Coating 
PROTECTIVE GRILLE  Black perforated Zintec 
FITTINGS  Two skids on base, with mating channels on top
16 x M8 inserts for optional castors
M20 top-mounted thread plate for pole mounting
16 x M10 mounting points
2x Bar handles, 1 on each side
 4x fittings for optional transit cover
IP RATING  IP24 factory option available 
DIMENSIONS  (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors)
 (W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors)
WEIGHT  46.5kg (103lbs) w/o castors 50kg (110lbs) with castors