SXP218B/W

MARTIN AUDIO SXP218B/W, 2x18"ACTIVE+DANTE SUB BASS LOUDSPEAKER, FLOWN
Číslo výrobku
3577
Čistá hmotnosť
25 kg
Dostupnosť
Na opýtanie
Predajná cena s DPH:
Cena na vyžiadanie
Tento produkt je dostupný lne na objednávku. Cena je stanovená pri objednávke.

Chcem zistiť cenu pre tento produkt

2x18"ACTIVE+DANTE SUB BASS LOUDSPEAKER, FLOWN


TYPE  Dual-driver, direct radiating powered subwoofer 
FREQUENCY
RESPONSE (3)
 35Hz – 150Hz ±3dB, -10dB @ 30Hz 
DRIVER  2x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet,
 waterproof cone
INPUT SENSITIVITY  -30dBu for 100dB SPL 
MAXIMUM SPL (4)  140dB continuous / 143dB peak 
DISPERSION  Omnidirectional / or Cardioid (paired) 
CROSSOVER  Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired) 
Module
Audio input
CONNECTORS  Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon 
ANALOGUE INPUT IMPEDANCE  20 kΩ balanced to ground 
MAXIMUM ANALOGUE INPUT LEVEL  24.6 Vpp (+21dBu), over voltage protected 
Internal Processing  Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 48dB/Oct LPF
Up to 200mS input delay
 Pre-set selection via rear panel switch
Network
CONNECTORS  2 x Neutrik® Ethercon RJ45 
PROTOCOL  TCP/IP and UDP/IP 
Amplifier Module
TYPE  Two 2 channel switch-mode, class D,
 Bridged Tied Load
PEAK OUTPUT POWER  4000W 
AVERAGE EFFICIENCY  89% 
COOLING  External fan 
MAXIMUM AMBIENT TEMPERATURE  40°C (104°F) for full output 
Power Supply
TYPE  Switch mode, fixed frequency with PFC 
AC INPUT OPERATING RANGE  85 – 265V ~ AC, 50 - 60Hz 
POWER FACTOR  > 0.98 
NOMINAL POWER CONSUMPTION  250W 
MAINS CONNECTOR  Neutrik® Powercon True1 
Mechanical
ENCLOSURE  Extensively braced multi-laminate birch plywood. 
FINISH  Durable Polyurea Coating 
PROTECTIVE GRILLE  Black perforated Zintec 
FITTINGS
  • Two skids on base, with mating channels on top
  • 16 x M8 inserts for optional castors
  • 24 x M10 mounting points
  • 4x Bar handles, 2 on each side
  • 4x fittings for optional transit cover
  • M20 Pole mount insert
IP RATING  IP24 factory option available 
DIMENSIONS  (W) 1085mm x (H) 537mm x (D) 792mm (920mm including castors)
 (W) 42.72in x (H) 21.13in x (D) 31.16in (36.20in including castors)
WEIGHT  101.5kg (224lbs) w/o castors 105kg (231lbs) with castors